New! V60N-130: High Pressure and High Volume
The newest addition to the V60N series of HAWE's variable displacement axial pistion pumps is ready for high pressure and high volume, with working pressures of up to 5800 psi (6090 psi peak) and displacement volumes up to 8 in3/rev. The pump has a high self-priming speed rating and a quiet operating noise level. Weighing only 68 lbs, this pump is one of the most power dense products on the market.
The V60N-130 is designed for direct flange mounting to the PTO on commercial vehicle transmissions, and includes an integrated torque controller to further safeguard the drive train.
Thru-shaft versions are available for flange mounting additional variable displacement and auxiliary pumps as well. Several different controllers, including an electrohydraulic displacement control, are offered to enhance a variety of applications.
This pump is a part of an energy efficient hydraulic solution that complies with emission regulations Tier 4 and Euro 6.
Features and benefits include: |
Applications include: |
|
 good performance-to-weight ratio |
forrestry equipment |
municipal trucks |
|
high self-priming speed rating |
agriculture equipment |
mining equipment |
|
different shaft and flange versions |
cranes and lifting equipment |
truck-mounted concrete pumps |
Pmax: |
5800 psi (continuous) 6090 psi (peak) |
Qmax: |
67 gpm |
Vg max: |
4–8 in3/rev |
Function: |
 |
Dimensions (inches) |
|||||
L |
L1 |
H |
H1 |
B |
m (lbs) |
| 10.6 | 2.1 | 8.25 | 1.77 | 5.1 | 68 |
Connections |
|||||
Drain Port D |
LS-signal Port |
Suction Port |
Pressure Port |
||
| G 3/4 | G 1/4 | Flange Ø 1 1/2 | G 1 | ||