39900 Series Area Control Cabinet The 39900 Series Area Control Cabinet consists of a DJ45 dual piston motor driven pump, reservoir with high-low reservoir level control valve, DR4 hydraulic reversing valve with manual shutoff valves, SS2200 controller and bulk fill solenoid valve mounted in a freestanding floor mount double door enclosure with green power on light, red fault light and combination motor starter with flange mount disconnect.
BM-B Lubricator A versatile unit that can be used with injectors, series progressive divider valves or dual line systems. It is ideal for medium- and large-sized machinery, with a maximum working pressure is 5800 PSI. The BM-B is a self-contained package, complete with reduction gear and flange mounted motor.
BS-B Lubricator The BS-B lubricator is used in cases where a lot of lubrication points shall centrally and reliably be supplied with lubricant. In connection with ZV-B distributors, the pump is predominantly used in dual-line lubrication systems. BS-B is also suitable for filling and lubrication systems.
FZ-A Series Lubricators FZ-A lubricators are primarily designed for direct feed applications for servicing up to 12 lubrication points. The FZ-A Lubricator is predominantly intended for multiline centralized lubrication systems. The pump is usually driven by the flange motor or by the machine to be lubricated via an oscillating lever or coupling.
FZ-B Series Lubricators FZ-B lubricators are primarily designed for use with progressive lubrication systems. The FZ-b Lubricator is designed as a single-piston pump with maximum 2 outlets. it is predominantly intended for multiline progressive lubrication systems. The pump is usually driven by the flange motor or by the machine to be lubricated via an oscillating lever or coupling. The FZ-b lubricator has either one combined single outlet with a maximum delivery of 12 x 0.1 cm3 or with 2 outlets respectively delivering 6 times the quantity of lubricant.
Dynamis Lubricator The Dynamis Lubricator has been developed and designed to serve the user as a multi-function automatic lubricant pump. Thanks to its compact construction and the consistent implementation of the modular system, this pump can be used not only for wind power stations but also in industry, in commercial vehicle lubrication and in spraying lubrication.
DYNAMIS Maxx The Model DYNAMIS Maxx is a 12 or 24V DC electrically driven grease pump which can be provided with dust and rain proof motors. If required, the pump can also be equipped with a 115/230 V AC converter. The pump is dust and water proof according to protection class IP67.
SureFire PDI Lubricator The SureFire PDI automatic lubricator is a robust and durable pump that can handle oil and soft greases. Its compact size is designed to fit your space requirements and lubrication demands. The SureFire PDI lubricator is a self-contained electric motor-driven gear pump that can adapt to a broad range of production machinery. It can handle single injectors or injector groups serving up to 100 lubrication points. Its versatility also allows it to perform with other lubrication system types and multiple applications.
TTN Lubricator TTN Lubricators are ideally suited for both on-road transport vehicles and off-road mobile machinery such as loaders, excavators, articulated trucks, graders, etc. These lubricators are designed to work in hostile conditions found on remote sections of highways and in industries, such as construction, mining and forestry. A unique reservoir design keeps out contamination and prevents condensation from forming, thus assuring reliable automatic lubrication of critical wear points such as bearings, bushings and pins.
Battery-powered Grease Gun The cordless battery-powered grease gun frees you from cumbersome cords or air hoses. Its high-capacity 18 VDC battery delivers grease faster and reduces the number of times you have to recharge the unit. When the battery runs low, just charge it using the included one-hour battery quick charger.
Barrel Pumps Air-operated barrel pumps are used where medium to heavy duty service conditions exist and rapid build-up of lubricating system pressure is desired in either air-operated central stations or bulk transfer of lubricants. Air-operated barrel transfer pumps are normally used to transfer lubricants from original refinery drums to the reservoirs on central lubrication systems.
DA Lubricators DA Lubricators are manual grease and oil, double-action piston high pressure pumps. For bearings that require an application of lubricant infrequently, the manually-operated pumping unit is used, and may be located on the machine or at any convenient point nearby.
L18P Lubricator The L18P, a manual one shot lubricator, is a spring return piston pump. Pushing the operating handle down raises a piston and compresses a spring. Releasing the handle discharges oil into the system. Oil viscosity does not affect discharge volume, but may affect system pressure.
LubeSite 200 Series Greasers Models 202, 205 & the new 260 feature clear, polycarbonate reservoir & base allows for visual inspection of the unit's internal workings. Assembled with medium springs; 3 additional light & heavy springs are included in each box of 10. Extra heavy springs (orange) are available for applications requiring the use of an extension or for high pressure flushing applications. Model 260 is individually boxed with 2 additional springs (heavy & light).

39900 Series Area Control Cabinet

The 39900 Series Area Control Cabinet consists of a DJ45 dual piston motor driven pump, reservoir with high-low reservoir level control valve, DR4 hydraulic reversing valve with manual shutoff valves, SS2200 controller and bulk fill solenoid valve mounted in a freestanding floor mount double door enclosure with green power on light, red fault light and combination motor starter with flange
mount disconnect.

BM-B Lubricator

A versatile unit that can be used with injectors, series progressive divider valves or dual line systems. It is ideal for medium- and large-sized machinery, with a maximum working pressure is 5800 PSI. The BM-B is a self-contained package, complete with reduction gear and flange mounted motor.

BS-B Lubricator

The BS-B lubricator is used in cases where a lot of lubrication points shall centrally and reliably be supplied with lubricant. In connection with ZV-B distributors, the pump is predominantly used in dual-line lubrication systems. BS-B is also suitable for filling and lubrication systems.

FZ-A Series Lubricators

FZ-A lubricators are primarily designed for direct feed applications for servicing up to 12 lubrication points.

The FZ-A Lubricator is predominantly intended for multiline centralized lubrication systems. The

pump is usually driven by the flange motor or by the machine to be lubricated via an oscillating lever

or coupling.

FZ-B Series Lubricators

FZ-B lubricators are primarily designed for use with progressive lubrication systems.

The FZ-b Lubricator is designed as a single-piston pump with maximum 2 outlets. it is predominantly

intended for multiline progressive lubrication systems. The pump is usually driven by the flange

motor or by the machine to be lubricated via an oscillating lever or coupling. The FZ-b lubricator has

either one combined single outlet with a maximum delivery of 12 x 0.1 cm3

or with 2 outlets

respectively delivering 6 times the quantity of lubricant.

Dynamis Lubricator

The Dynamis Lubricator has been developed and designed to serve the user as a multi-function automatic lubricant pump. Thanks to its compact construction and the consistent implementation of the modular system, this pump can be used not only for wind power stations but also in industry, in commercial vehicle lubrication and in spraying lubrication.

DYNAMIS Maxx

The Model DYNAMIS Maxx is a 12 or 24V DC electrically driven grease pump which can be provided with dust and rain proof motors. If required, the pump can also be equipped with a 115/230 V AC converter. The pump is dust and water proof according to protection class IP67.

SureFire PDI Lubricator

The SureFire PDI automatic lubricator is a robust and durable pump that can handle oil and soft greases. Its compact size is designed to fit your space requirements and lubrication demands. The SureFire PDI lubricator is a self-contained electric motor-driven gear pump that can adapt to a broad range of production machinery. It can handle single injectors or injector groups serving up to 100 lubrication points. Its versatility also allows it to perform with other lubrication system types and multiple applications.

TTN Lubricator

TTN Lubricators are ideally suited for both on-road transport vehicles and off-road mobile machinery such as loaders, excavators, articulated trucks, graders, etc. These lubricators are designed to work in hostile conditions found on remote sections of highways and in industries, such as construction, mining and forestry. A unique reservoir design keeps out contamination and prevents condensation from forming, thus assuring reliable automatic lubrication of critical wear points such as bearings, bushings and pins.

Battery-powered Grease Gun

The cordless battery-powered grease gun frees you from cumbersome cords or air hoses. Its high-capacity 18 VDC battery delivers grease faster and reduces the number of times you have to recharge the unit. When the battery runs low, just charge it using the included one-hour battery quick charger.

Barrel Pumps

Air-operated barrel pumps are used where medium to heavy duty service conditions exist and rapid build-up of lubricating system pressure is desired in either air-operated central stations or bulk transfer of lubricants. Air-operated barrel transfer pumps are normally used to transfer lubricants from original refinery drums to the reservoirs on central lubrication systems.

DA Lubricators

DA Lubricators are manual grease and oil, double-action piston high pressure pumps. For bearings that require an application of lubricant infrequently, the manually-operated pumping unit is used, and may be located on the machine or at any convenient point nearby.

L18P Lubricator

The L18P, a manual one shot lubricator, is a spring return piston pump. Pushing the operating handle down raises a piston and compresses a spring. Releasing the handle discharges oil into the system. Oil viscosity does not affect discharge volume, but may affect system pressure.

LubeSite 200 Series Greasers

Models 202, 205 & the new 260 feature clear, polycarbonate reservoir & base allows for visual inspection of the unit's internal workings. Assembled with medium springs; 3 additional light & heavy springs are included in each box of 10. Extra heavy springs (orange) are available for applications requiring the use of an extension or for high pressure flushing applications. Model 260 is individually boxed with 2 additional springs (heavy & light).

Pumps